Matek F722-SE Flight Controller and PDB
The Matek F722-SE Flight Controller is a full-featured FC and PDB on one board. A user can find just about everything they could desire, including dual gyros, F7 MCU, DP310 barometer, built-in OSD, 5 UARTS, VTX power switch, dual camera switcher, 6-36V input voltage, 5V/2A BEC, and more.
This amazingly versatile FC makes possible any fixed-wing or multirotor build.
Specifications:
- MCU: 216MHz STM32F722RET6
- IMU: MPU6000 & ICM20602, Dual Gyros built-in (SPI)
- Baro: BMP280 or DPS310(I2C)
- OSD: AT7456E (SPI)
- Blackbox: MicroSD card slot (SPI)
- 5x UARTS (1,2,3,4,6) with build-in inversion
- 1x Softserial supported
- 8x Dshot/Proshot/Oneshot outputs
- 1x I2C
- 4x RX6 pad(one per cornet) for BLheli32 ESC telemetry
- 4x individual ESC power/signal pads
- 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
- 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
- Vbat filtered output power for VTX, Switchable via AUX (modes tab-user1)
- Dual Camera image switchable via AUX (modes tab-user2)
- Camera control: Yes
- Smartaudio & Tramp VTX protocol: Yes
- WS2812 Led Strip: Yes
- Beeper: Yes
- RSSI: Yes
- Additional ADC for INAV analog airspeed
PDB Specifications
- Input: 6~36V (3~8S LiPo) w/TVS protection
- PDB: 4x35A (Max.4x46A)
- BEC: 5V 2A cont. (Max.3A)
- LDO 3.3V: Max.200mA
- Current Sensor 184A (Scale 179)
- Battery Voltage Sensor: 1:10 (Scale 110)
FC Firmware
- BetaFlight / INAV
- Target: MATEKF722SE
Physical
- Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
- Dimensions: 36 x 46 mm
- Weight: 10g
Includes:
1x Matek F722-SE Flight Controller and PDB
6x Silicon Grommets M4 to M3
1x FR4 PCB Plate 36*36*1mm
1x Rubycon ZLH 35V/470uF (Low ESR) Capacitor
