Happymodel Super F405HD ELRS AIO 3-In-1 Flight Controller
Flight controller, 20A 4-In-1 BLHeli_S ESC, and ExpressLRS 2.4GHz Receiver on one board.
The Super F405HD ELRS AIO flight controller has an integrated UART 2.4GHz ExpressLRS receiver and 20A BLHeli_S ESC (Bluejay firmware pre-installed) which could support 2-4s battery. Bigger Mosfet could support high to 20A currents and reserved 6 pin socket for DJI HD equipment plug-and-play. It’s a great solution for building 2-4S HD digital FPV whoop.
Specifications:
Flight Controller:
- MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
- GYRO Sensor: ICM42688 (SPI connection)
- Mount hole size: 25mm*25mm
- Power supply: 2~4S battery input (DC 8.7V-17.4V)
- Built-in 20A(each) Blheli_S 4in1 ESC
- Built-in Serial ExpressLRS 2.4G (Default connected to UART2)
- Built-in BMP280 Barometer
- Built-in 8MBp blackbox
- Built-in voltage meter sensor, voltage meter scale 110
- Built-in current meter sensor, current meter scale 470
- Flight controller firmware target: BETAFLIGHTF4
Onboard 4-In-1 ESC:
- MCU upgraded to EFM8BB21
- Power supply: 2-4S LiPo/LiPo HV (7v/17v)
- Currents: 20A continuous peak 25A (5 seconds)
- Support BLHeliSuite programmable
- Factory firmware: Bluejay 0.19.2
- Firmware target: F_H_40_48_v0.19.2
- Default protocol: DSHOT150/DSHOT300/DSHOT600
Onboard UART ELRS 2.4GHz RX:
- Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
- RF Frequency: 2.4GHzAntenna plug: IPEX
- Telemetry output Power: <12dBm
- Receiver protocol: CRSF
- Default firmware version: ExpressLRS V3.0.1
Onboard Voltage and Amperage Setting:
- Voltage Meter Scale: 110
- Amperage Meter Scale: 470
Includes:
1x Happymodel Super F405HD ELRS AIO 3-In-1 Flight Controller
1x Antenna
1x Power Connector
4x Anti-Vibration Grommets
4x Solder on Connectors
