Matek F405-MiniTE Flight Controller
The F405-MiniTE is a 20x20 flight controller with all the features, performance, and quality users have come to expect from Matek. Comes with a mounting board to convert to 30x30.
Features:
- F405 has 1MB flash which can run with ArduPilot, even with INAV firmware.
- Redesigned target MATEKF405TE support 8x bi-directional DSHOT.
- Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX
- Compared with F722-miniSE 8motors or 6motor+2servos, F405-miniTE support 8motors+3servos in INAV/BF multirotor mixer
- InvenSense GEN3 IMU ICM42605
- Supports both 20x20 and 30.5x30.5mm mounting
Specifications:
- MCU: STM32F405RGT6
- IMU: ICM42605
- OSD: AT7456E
- Baro: Goertek SPL06-001 (I2C)
- Blackbox: 16M-byte Flash memory
- 6x UARTs, 1x Softserial_Tx option
- 12x PWM outputs (8x Dshot)
- 1x I2C
- 4x ADC (VBAT, Current, RSSI, Airspeed)
- 2x PINIO
- 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
- Dual BEC, 5V 1.7A & 10V 1.4A
- Input: 6~30V (2-6S)
- 10V output ON/OFF switchable
- Convertible 20mm to 30.5mm mounting
- Current Sensor: No
- Dimensions: 28x28mm
- Weight: 5g
Firmware:
- ArduPilot: MatekF405-TE
- INAV: MATEKF405TE (not available in INAV configurator for now)
- BetaFlight: MATEKF405TE
Includes:
1x Matek F405-MiniTE Flight Controller
1x 20mm to 30.55 Conversion Plate (blue PCB)
6x Silicon Grommets M4 to M3
6x Brass Grommets M3 to M2
1x SH1.0_8pin cable 5 cm
1x SH1.0_6pin to GH1.25_8pin cable 8cm
