Happymodel Crux35 Analog 3.5 Inch 4S Micro Quad
Crux35 Analog is an ultra-lightweight 3.5 Inch FPV Freestyle FPV Racing Drone, the weight of the whole drone is only 87g. The Crux35 series uses Happymodel EX1404 high-efficiency motor and HQPROP 3.5-inch three-blade propeller to ensure the largest thrust-to-weight ratio under the most efficient premise, which can bring you a smooth Freestyle flying experience.
The analog version is equipped with the Caddx Ant FPV Camera and Happymodel OVX303 5.8GHz VTX. Includes SPI ExpressLRS 2.4GHz receiver.
Specifications:
- Brand: Happymodel
- Product name: Crux35 Analog
- Wheelbase: 150mm
- Weight: 89gram
- Size: 130mmx130mmx45mm(without propellers)
- Flying time: 9min~15min 4s 750mah battery
HAPPYMODEL OVX303 5.8GHZ VTX
- Model: OVX303
- Frequency: 5.8G 40CH
- Transmitting Power: 0/RCE/25mw/100mw/300mw
- Power supply: DC 5V
- Current (5v): <650ma (300mw)
- Weight: 1.5gram without antenna
CADDX ANT FPV CAMERA
- Image Sensor: 1/3″ CMOS Sensor
- Horizontal Resolution: 1200 TVL
- TV System: NTSC or PAL
- IMAGE: 16:9 or 4:3
- Synchronization: Internal
- Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
- S/N Ratio : >52dB (AGC OFF)
- Video Output: CVBS
- Lens: 1.8mm
- Min. Illumination: 0.001Lux@F1.2
- Auto Gain Control: YES
- BLC: YES
- WDR: Global WDR
- DNR: 3D DNR
- Dimensions: 14*14mm(with bracket to 19*19mm)
- Wide Power Input: DC 3.7-18V
- Work Temperature: -20℃~+60℃
- Weight: 2g (N.W.)
EXPRESSLRS FLIGHT CONTROLLER
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: MPU-6000(SPI connection)
- Mount pattern: 20×20 M2Size:32*28*9mm
- Power supply: 2-4S Lipo battery
- Built-in 12A Blheli_s ESC each
- Built-in Betaflight OSD(SPI Control)
- Built-in SPI ExpressLRS 2.4GHz receiver
- Built-in 5V 1A BEC
- Flight controller firmware target: CRAZYBEEF4SX1280
EX1404 MOTOR
- KV: 3500
- Configuration: 9N12P
- Dimensions: 15*15mm
- Weight: 9g
Includes:
1x Happymodel Crux35 Analog 3.5 Inch 4S Micro Quad
