Newbeedrone TBS AcroBee65 BLV4 BNF Crossfire Analog Whoop
In collaboration with TBS, Newbeedrone has created the AcroBee65 BLV4 BNF with Crossfire built-in. This tiny take-anywhere micro drone / tiny whoop is a ton of fun and allows you to fly both indoors and out. With 0802 27000KV motors, up to 400mW output VTX, 12A BLHeli_S pre-flashed with BlueJay, and more, this Acrobee should generate plenty of excitement and smiles.
Specifications:
- Flight Controller: BeeBrain BLV4 Crossfire
- MCU: STM32F411
- Gyro: BMI270
- VTX: Switchable output power from 5mW - 25mW (for racing) - SmartMAX (SmartMax up to 400mW) with BeeTX 5.8GHz Antenna
- ESC: 12A BLHeli_S Pre-flashed with Bluejay 0.18 target: S-H-40 48KHz
- OSD: NBD7456 Graphical OSD compatible with Betaflight OSD
- Receiver: Crossfire Nano Receiver with MINIMORTAL T Antenna
- Flight Controller Weight: 6.5g (including antennas and battery connector)
- Flight Controller Size: outer dimensions: 29x29x7.6mm
- Flight Controller Holes: 25.5x25.5mm
- Battery Input: 1-2S (for 2S you will need to set throttle cap at less than 50%)
- Uart2: Crossfire Nano receiver binding instruction: Just like Crossfire Nano, after power up drone, hold the bind button on back side of the SUB to get into bind mode)
- Power Connector: NBD-PH2.0 Connector
- Motors: Flow 0802 27000KV
- Frame: Cockroach65 Brushless Frame
- Propellers: Azi Tri-blade 312mm 1.0
Note* The 27000kv motor on your device is designed for high performance and may be too strong for most users. To ensure safety, the factory has set the device to only use 80% of the maximum power by default. However, if you require more power, it is possible to adjust the settings through the Betaflight software, which can be accessed under the PID tab. Please note that increasing the power beyond the default setting may increase the risk of damage to the device or injury to yourself or others, and should be done with caution.
Includes:
1x Newbeedrone TBS AcroBee65 BLV4 BNF Crossfire Analog Whoop
