Happymodel ExpressLRS 2.4GHz EP1 Nano Receiver

$13.50
Unit price per

The Happymodel 2.4GHz ELRS nano series receiver is an open-source program based on ExpressLRS.

We have developed the Nano 2.4GHz rx of ESP8285 version named EP1. The RF module of EP1 uses ESP8285 MCU. So you can upgrade firmware by WIFI, that’s too simple.

Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV races and Long Range FPV. And very suitable for Tiny whoop because of the ultra-light and Nano size.

Specifications:

Type: ISM
ESP8285 MCU
SX1280IMLTRT RF Module
Omnidirectional antenna
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
Working voltage: 5v
Weight: 0.42gram(without antenna)
Dimension: 10mm*10mm*3mm
Peak gain: 2.23dB

Notes:

Since the Official Perfect version of ELRS firmware has not been released yet, currently the EP1 RX comes pre-loaded with beta firmware, you can upgrade the official firmware when Official perfect target is available.

More details
https://github.com/ExpressLRS/ExpressLRS

Bind procedure:

Supply power to EP1 RX, wait until the LED on the RX is off, immediately turn off the power, and then repeat again the above steps. When the RX is powered on for the third time, the LED light will start to double-flash, which means that the RX enters the binding mode
Insert the ES24TX module or other DIY 2.4G ELRS TX to Radio transmitter, and choose External RF mode to CRSF protocol, then you can find ELRS menu from the Radio systems(Need to copy the ELRS.LUA file to the SD-Card tools first), Enter into ELRS and press [Bind], the LED on the RX module will getting to be solid if bind successfully.

Receiver LED status meanings:

EP1 RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module; LED flash fast means in WIFI hotspot mode, you can connect the WIFI of the RX and upgrade firmware of the RX via visit 10.0.0.1 from the web browser(password: expresslrs)

Includes:
1x Happymodel ExpressLRS 2.4GHz EP1 Receiver
1x 40mm Antenna
1x 90mm Antenna