Matek H743-Mini H7 20x20 Flight Controller
** Discontinued - New Version Here **
The Matek H743-Mini is a powerful flight controller using the HSTM32H743VIT6 MCU running at 480MHz. It is matched with dual gyros ( MPU6000 & ICM20602 ), an Infineon DPS310 barometer, and 11 PWM outputs. Measuring 36x28x6.5mm, this is a full-featured and very worthy choice for anyone looking for a flight controller that can work on quads or wings.
Specifications:
- MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
- IMU: MPU6000 (SPI1) & ICM20602 (SPI4)
- Baro: Infineon DPS310 (I2C2)
- OSD: AT7456E (SPI2)
- Blackbox: MicroSD card socket (SDIO)
- 5.5x Uarts (1,2,4,6,7, Rx8)
- 11x PWM outputs(S1~S10, LED)
- 2x I2C (I2C1/DA1 CL1 pads, no I2C2 breakout)
- 1x CAN (C-H, C-L pads)
- 5x ADC (VBAT, Current, RSSI, VB2, CU2)
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- 1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
- Dual Camera Inputs switch
- 8V power ON/OFF switch
- Mounting:
- 20x20/Φ3mm with Silicon Grommets
- 20x20/Φ2mm with Brass Grommets
- Dimensions: 36x28x6.5mm
- Weight: 7g
Firmware:
- ArduPilot: MATEKH743
- BetaFlight: MATEKH743
- INAV: MATEKH743
Includes:
1x Matek H743-Mini H7 20x20 Flight Controller
6x Silicon Grommets M4 to M3
6x Brass Grommets M3 to M2
1x JST-SH1.0_8pin cable, 5cm
2x JST-SH1.0_8pin Connectors
