** Discontinued - New Version Here **
Diatone's Mamba MK4 (fourth generation) stack is a redesign of its already fantastic line of flight controllers and ESCs. Improvements include making the products easier to use by increasing soldering pad sizes by 30%, pad spacing by 100%, adding USB-C, additional UARTS and I2C, better filtered BEC, ESC support for 128K PWM, WiFi config through the Speedy Bee App, and more.
What's New?
A completely different pad style has been redesigned to increase pad area by 30% and pad spacing by 100%, reducing solder errors and associated failures.
- The pad area increased by 30%
- Pad spacing increased by 100%
- MP9943 synchronous rectifier BEC
- MINI series upgrade DJI interface and 5v 15W/9V 18W 2 set BEC
- USB Type C
- 6 Set UART and I2C
- 4 Set Power Protection
- 32Bit ESC all support 128K
- Mini series FC uses 2mm and 3mm mounting holes, special dampening ring
- Upgrade the twisted pair anti-jamming cable and reinforcement process
Specifications:
F722 MINI MK4 FLIGHT CONTROLLER
- MCU: STM32F722
- Frequency: 216MHz
- Gyro: Gyro ICM42688P
- Barometer: SPL06
- OSD: AT 7456E
- Blackbox: 16M Memory
- Barometer: Yes
- UARTS: 6 Sets
- I2C: Yes
- F.Port: Yes
- Buzzer: Yes
- Current: Yes
- ESC Signal: 8 Sets
- BEC 3.3V: 0.5A
- BEC 5V: 2.5A
- BEC 9V: 2A
- MB LED: Yes
- BF LED: Yes
- Air Unit Port: Yes
- VTX Switch: Yes
- BEC Protection: Yes
- Receiver Protection: Yes
- TVS Protection: Yes
- Input: 6S LiPo
- Firmware: Betaflight
- Mounting: 20.0x20.0mm,M3/M2
- Size: 29.0x29.5x6.5mm
- Weight: 6.0g
F40_128K BL32 MINI 4-IN-1 ESC
- Input Voltage: 2~6S LiPo (8.4V~25.2V)
- Continuous Current: 40A
- Burst Current: 45A
- BEC: No
- Target: BLHeli_32 MAMBA F40_128K_MINI
- Soft: DShot300/600/1200
- PWM: 24~128K
- TVS Protection: Yes
- Mounting: 20x20mm/M2-M3
Includes:
1x Diatone Mamba MK4 F722 Mini Flight Controller
1x Diatone Mamba F40_128K BL32 Mini 4-In-1 40A ESC
5x M2 Silicone Grommets
5x M3 Silicone Grommets
5x M2 ESC Isolation Columns
5x M3 ESC Isolation Columns
1x 8 Pin single-ended cable for flight controller
2x 8 Pin Cable
1x 6 Pin Air Unit Cable
1x XT60
1x Capacitor