Happymodel Mobula 6 Freestyle HDZero AIO5 Whoop

  • $199.99
    Unit price per 

 

The Happymodel Mobula6 Freestyle HD BNF is a 65mm HD brushless tiny whoop that weighs less than 20g. With tiny whoops, every gram makes a large difference in flight performance. To achieve such a low weight, HDZero has developed the AIO5, the world's first 5-in-1 AIO that contains an HDZero VTX, FC, ESC, ELRS RX, and 5V1A BEC. Using a single thick PCB rather than a stack of 2 improves durability and simplicity – get ready for a new era of no-compromise tiny whooping in clear digital video!

To keep weight and cost to a minimum, the Freestyle HD BNF features the lightweight HDZero Lux camera. The camera outputs HD composite video (720p) via a single wire instead of a MIPI cable, reducing footprint, cost, and increasing durability. The digital video signal has stable color reproduction and 720p progressive scan video with the stable near-zero latency HDZero is known for.

In order to achieve the goal of extreme weight reduction, HAPPYMODEL used original Japanese RENY screws at all costs, and also designed a lighter 5.8G VTX antenna. All these improvements are to make this HD BNF weigh less than 20 grams. We hope you like it.

Specifications:

  • Weight: 19.6g
  • Recommended Battery: 1S 300mAh
  • Propeller Size: 31mm
  • AIO Flight controller
    • MCU: STM32F411 (100MHz, 512K Flash)
    • Gyro: BMI270
    • Onboard voltage and amperage meters
    • Built-in 5A(each) BLHeli_S 4-in-1 ESC
    • Built-in 5.8G HDZero VTX
    • Built-in SPI ExpressLRS 2.4GHz receiver
    • Built-in 5V 1A BEC
    • Board size:28.5×28.5mm with a 25.5×25.5 mounting hole size
    • Firmware target: CRAZYBEEF4SX1280

HDZero LUX Camera

  • Sensor size: 1/2 inch
  • Resolution: 720p60 4:3 / 16:9
  • FOV: 
    • D:155° H:126°  V:94°(4:3)
    • D:170°  H:145°  V:82°(16:9)

Motors

  • Kv:28000
  • Stator diameter: 7mm
  • Stator length:2mm
  • Shaft diameter: Φ1mm
  • Weight:1.5g

Includes:
1x Happymodel Mobula 6 Freestyle HD Whoop Built-in HDZero AIO5
1x Spare canopy
1x Spare propeller(set)
1x Screwdriver
1x Propeller Disassemble Tool


We Also Recommend