This is our new iFlight BEAST series AIO FCs for your ultimate build. A future-proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight, etc. Lightweight, minimum size, minimum work. This could only be achieved by using BGA chipsets instead of ordinary QFP (big size) MCUs and ultra-powerful Mosfets for almost any build.
Solder your motor wires on and let's go! DJI Plug&Play plug and so many UARTs most people wouldn't even use them all. Compatible to digital and analog FPV, onboard Barometer for possible long-range flights, and much more. Unleash the beast!
Features:
- Vista digital system Plug-and-Play (VBAT passthrough)
- MCU: BGA-STM32F745, 216MHz
- Built-in QMC5883 Compass
- OSD: AT7456E
- Gyro: MPU6000
- Blackbox: 125MB Onboard Flash
- BEC output: 5V 2.5A / 10V 2.5A
- Barometer: DPS310
Safety reminder:
The DJI plug&play port has no voltage regulator (BEC) and is passing through VBAT. The Caddx Vista goes up to 26.4V (6S), the DJI Air Unit goes up to 17.6V (4S). Make sure not to plug in your DJI Air Unit directly when you're flying 6S, because this would fry it!
Small motor 4S builds should usually need an additional capacitor of at least 16V/220uF, for 6S go up to 35V or even 50V. Bigger motors have a bigger current draw, higher voltage spikes, and more serious back EMF (motor braking, works like a generator). Make sure to add big enough or even bigger low ESR capacitors on the AIO battery pad or on your battery lead the more aggressive motors you fly. There's a choice of capacitors in the package, but it's never a bad idea to make sure to protect your board. Smaller boards have less capacitance which has to be covered with external capacitors, there's no way around it.
*Barometer can only be used with Betaflight 4.3.0 and above!
Specifications:
FC Beast STD F7 AIO
- MCU: BGA-STM32F745
- Gyro: MPU6000
- Blackbox: 125MB Onboard Flash
- BEC output: 5V 2.5A / 10V 2.5A
- Uarts: 5
- Barometer: DPS310
- Connector: Micro-USB
- OSD: IFLIGHT OSD (AT745E)
- FC Firmware:IFLIGHT_F745_AIO 4.2.4
- Compass: QMC5883
- Mounting pattern: 30.5*30.5mm φ4mm
- Dimensions: 37.5*44mm
- Weight: 12.2g
ESC 45A 2-6S
- Current Sensor: Yes
- Input: 2-6S LIPO
- Current scale: 100
- Constant: 45A / Burst: 50A
- BLHeli: BLHeli_32
- Telemetry: no
- ESC Firmware: IFLIGHT_G071_4IN1
Includes:
1x iFlight Beast STD F7 AIO
2x 470uF/35V Capacitor
1x XT60 16AWG Cable 100mm
4x M3 Silicon Grommets
8x M3*14mm Screws
8x M3 Transparent Nylon Nuts
8x 0.8mm Black Heat Shrink Tube 10mm